MTKClient

bkerler (GitHub) and contributors · also known as mtk

Open sourceActive

Latest tagged release is v2.1.4.1 (2026-03-18); development continues on the main branch.

MTKClient is an open-source Python utility for MediaTek chipsets. Its README describes it as a tool for exploitation and for reading and writing flash. The usage guide lists commands to dump single partitions, the full flash or a flash range over the chipset's boot ROM or preloader, with a graphical interface for basic dumping, and also write, erase and bootloader-unlock functions. It is dual-use: the same functions can alter the target device's storage.

Facts

Websitegithub.com
Vendorbkerler (GitHub) and contributors
LicenceOpen source (GPL-3.0)
CategoryAcquisition
FunctionsAcquisition
TargetsAndroid, IoT
Runs onWindows, Linux, macOS
PricingFree
UsersResearch, Open-source DFIR community
Last activity2026-10-26 · Last commit on main (merge of pull request #416) [github.com]
GitHub activitybkerler/mtkclient · 1,483 stars · last push 2026-10-26 · latest release v2.1.4.1 (2026-03-18) · checked 2026-11-10

Capabilities

  • The README describes the tool as 'some mtk tool for exploitation, reading/writing flash and doing crazy stuff', and credits the kamakiri, linecode and heapbait exploits. [github.com]
  • The usage guide lists commands to read a single partition, the full flash, a flash offset range, or all partitions into a directory, to print the GPT, and to mount the flash as a filesystem; a graphical interface supports dumping partitions or the full flash. [github.com]
  • The usage guide describes access either through a boot ROM (BROM) exploit, through a preloader-mode exploit with a supplied loader, or with 'stock mtk functionality without exploits'. [github.com]
  • The usage guide also lists commands to read eFuses, peek and poke device memory in DA mode, and read the RPMB partition (xflash only), as well as an option to dump flash on IoT chips MT6261/MT2301. [github.com]

Limitations

  • The usage guide also lists commands that write and erase partitions, write a full flash image, and lock or unlock the bootloader (seccfg). These change the device's stored data, and the guide's bootloader-unlock section begins with erasing the metadata and userdata partitions. [github.com]
  • Chipset-specific: for MT6781, MT6789, MT6855, MT6886, MT6895, MT6983 and MT8985 the README says the bootrom is patched and a new V6 protocol is used, so a loader from the Loaders/V6 directory and preloader mode are needed; on some devices the preloader is deactivated. [github.com]
  • The README instructs powering the device off and connecting it while holding a button combination to enter BROM mode (the V6 chipsets above use preloader mode with no buttons); Windows needs the stock MTK port driver and UsbDk; on Linux a patched kernel is needed only for old kamakiri. [github.com]
  • The usage guide marks some functions as incomplete: writing a full flash image 'currently only works in da mode', and RPMB write is 'currently broken, xflash only'. [github.com]

Related tools

Guides that discuss this tool

Sources

  1. GitHub: bkerler/mtkclient (README) (github.com)
  2. mtkclient usage guide (README-USAGE.md) (github.com)
  3. mtkclient LICENSE (GNU GPL v3) (github.com)
  4. GitHub release v2.1.4.1 (2026-03-18) (github.com)
  5. GitHub: mtkclient commit history (github.com)

Reviewed . Spotted an error? See the corrections policy.