Easy JTAG Plus
CommercialActive
Easy JTAG Plus is a hardware box from the Z3X Team that combines eMMC, UFS, NAND and JTAG programmer functions with JTAG-finder functionality. The vendor's home page describes it as bringing memory programming, device repair and data recovery into one service platform. The vendor also publishes knowledge-base pages on eMMC in-system programming and on examining eMMC images in Autopsy, and hosts a chip-off article it dates to May 2017. The box can write as well as read memory.
Facts
| Website | easy-jtag.com |
|---|---|
| Vendor | Z3X Team |
| Licence | Commercial (Proprietary hardware box activated by a Z3X smart card; some functions are paid add-ons) |
| Category | Hardware (chip-off, JTAG, ISP) |
| Functions | Acquisition, Recovery |
| Targets | Android, Chip (NAND/eMMC/UFS), Memory cards |
| Runs on | Hardware |
| Pricing | Hardware box sold through resellers listed on the vendor Buy Jtag page; paid add-ons exist; the vendor site publishes no price [easy-jtag.com] |
| Users | Private recovery |
| Last activity | 2025-12-01 · EasyJTAG Plus software version 2.1.0.0 [easy-jtag.com] |
Capabilities
- The vendor's product-features page lists memory programming and diagnostics for eMMC (identify, read, write and erase through sockets, adapters and in-system programming connections, full or selective backups, CID/CSD/extended CSD inspection), UFS (logical-unit access, read and write, descriptors, attributes and configuration; the page headlines 'Full UFS 4.0 support' for compatible devices and hardware), NAND, SPI flash and I²C EEPROM, JTAG with JTAG-finder functionality, and SD/MMC cards that can be read, written, erased, imaged and locked or unlocked. [easy-jtag.com]
- The product-features page states that the EasyJTAG NANDKit adds tools for supported Apple PPN devices, including boot-area and memory replacement workflows, and that NAND functions cover reading, writing and erasing supported NAND memory. [easy-jtag.com]
- Per a UFS article that the vendor dates to March 2019 and says describes the original implementation, the box then supported UFS identification, multiple-LUN access, reading, writing and access to UFS attributes and configuration, with operation speed limited to 1.5Mb/sec at that time (the article's figure), a minimum box firmware of 2.35, and a separate EasyJTAG UFS socket needed for the BGA153, BGA95 or BGA254 memory types. [easy-jtag.com]
- Version 2.1.0.0 (1 December 2025) added vendor flashing for MediaTek, Spreadtrum/Unisoc and Nvidia Tegra devices, UFS smart reports, a manual partition scan for a selected ROM/LUN, and an Explorer supporting EXT, FAT, NTFS, EROFS and F2FS. [easy-jtag.com]
- The vendor's Knowledge Base menu lists pages titled 'eMMC ISP TP w/o PullOFF', 'eMMC ISP TP with Pull OFF' and 'eMMC Forensis with Autopsy', and its Software menu lists 'Android eMMC Explorer [Free Addon]'. [easy-jtag.com]
- The vendor hosts an article titled 'CHIP-OFF TECHNIQUE IN MOBILE FORENSICS', which states that it was published in May 2017 and that product descriptions, device examples and procedures reflect the original article. [easy-jtag.com]
Limitations
- The vendor's home page describes Easy JTAG Plus as bringing 'memory programming, device repair and data recovery into one service platform'; it describes the tools as being for a 'service workflow'. [easy-jtag.com]
- The product-features page describes the tools as 'a versatile set of tools for the service bench', lists writing and erasing functions, and advises: 'Before writing, erasing or changing memory configuration, verify the target and keep a suitable backup.' [easy-jtag.com]
- NIST SP 800-101 Rev. 1 (2014) says of flasher boxes generally that they were 'originally designed with the intent to service or upgrade mobile devices' and that 'Nearly all flasher boxes were not designed with a forensic use as its intended purpose'; it does not name this product. [nvlpubs.nist.gov]
- The product-features page states that, depending on the task, a compatible EasyJTAG Plus box, socket or adapter, appropriate box firmware, drivers or a software activation may be needed; that SPI flash and I²C EEPROM functions require a compatible FX4/LX4 or FX9/LX9 WinUSB box, suitable firmware and the correct wiring; and that device and operation support varies. [easy-jtag.com]
- The product-features page states that, for data recovery, access to files can depend on the condition of the storage and any device encryption. [easy-jtag.com]
- The vendor's UFS article, which it dates to March 2019, states that minimal firmware for UFS access is 2.35 and that UFS support is impossible on old hardware revisions (1.xx firmwares). [easy-jtag.com]
- Some functions require separately sold activations; the vendor site lists 'LG activation PRO' and 'Z3X Samsung PRO' as paid add-ons. [easy-jtag.com]
Locked and encrypted devices
The vendor's materials reviewed make no claim to decrypt user data. Its 2.1.0.0 release notes (1 December 2025), under the heading "Xiaomi authorization and patch routines", list "Improved authorization-bypass logic for selected Xiaomi models, within the applicable security limitations" and "Fixed Xiaomi Mi Account-related patch routines on supported firmware"; the same notes list UFS unlock configuration ("support for UFS chips that accept unlock commands") and DataProtect removal ("clear protection on compatible models when the hardware and firmware permit it") (vendor-stated). The notes do not claim decryption of user data. The product-features page states that, for data recovery, access to files can depend on the condition of the storage and any device encryption. The vendor-hosted chip-off article (which the vendor says was published in May 2017 and describes older tooling, e.g. a Sony Ericsson SE-T303 dump) states the method "forces examiner to work with encryption and encoding, unknown or hardly known file systems". Android documentation states that devices launching with Android 10 or later must use file-based encryption, with FBE keys stored encrypted on disk and non-CE keys wrapped by a Keystore key 'not exposed outside the TEE'; the documentation does not discuss chip-off or raw eMMC/UFS reads, so any conclusion about what such a read returns is this site's inference, not the vendor's or Google's statement.
Sources: easy-jtag.com, easy-jtag.com, easy-jtag.com, source.android.com
Statements about lock bypass are point-in-time and attributed to their source; support changes with device and OS releases. See the methodology.
Links
Related tools
- Medusa Pro II Box · Hardware (chip-off, JTAG, ISP)
- RIFF Box 2 · Hardware (chip-off, JTAG, ISP)
- PC-3000 Flash · Hardware (chip-off, JTAG, ISP)
Guides that discuss this tool
- Chip-off, ISP and JTAG in the UFS and encryption era · What chip-off, ISP and JTAG still yield on phones with UFS or eMMC storage and file-based or full-disk encryption, per SWGDE, NIST, AOSP, JEDEC and papers.
Sources
- EasyJTAG: home page (easy-jtag.com)
- EasyJTAG: product features (easy-jtag.com)
- EasyJTAG: UFS memory (easy-jtag.com)
- EasyJTAG Plus Version 2.1.0.0 (2025-12-01) (easy-jtag.com)
- EasyJTAG: Chip-off technique in mobile forensics (easy-jtag.com)
- EasyJTAG: eMMC Forensis with Autopsy (easy-jtag.com)
- NIST SP 800-101 Rev. 1: Guidelines on Mobile Device Forensics (2014) (nvlpubs.nist.gov)
- Android Open Source Project: file-based encryption (source.android.com)
- EasyJTAG: Buy Jtag (reseller list) (easy-jtag.com)
Reviewed . Spotted an error? See the corrections policy.