Medusa Pro II Box

GSMServer team (Medusa Box) · also known as Medusa Pro Box; Medusa PRO II

CommercialActive

The vendor news archive shows software-release posts up to Medusa PRO Software v.2.2.5.5 (2024-09-19); later posts (2024-12-23 to 2026-04-03) are seasonal greetings. The download page lists Medusa Pro Repair Suite installer 2.2.5.8 dated 2025-11-25.

Medusa Pro II Box is a hardware programmer sold on medusabox.com, copyright GSMServer team, for reading, writing and repairing phone flash memory over eMMC and UFS interfaces, including in-system programming of UFS. The vendor describes it as a phone repair and servicing tool, and the pages reviewed make no forensic-use claims. It is the model the vendor currently leads with; the cheaper Medusa II adds JTAG but not UFS.

Facts

Websitemedusabox.com
VendorGSMServer team (Medusa Box)
LicenceCommercial (Proprietary hardware box with Medusa PRO Repair Suite software)
CategoryHardware (chip-off, JTAG, ISP)
FunctionsAcquisition, Recovery
TargetsAndroid, Chip (NAND/eMMC/UFS)
Runs onHardware
PricingOne-time hardware purchase; list price shown by the vendor · USD 349 (Medusa Pro II Box; Medusa II Box Basic Set USD 125), vendor site, 2026-10-29 [medusabox.com]
UsersPrivate recovery
Last activity2025-11-25 · Medusa Pro Repair Suite installer 2.2.5.8 posted [medusabox.com]

Capabilities

  • The vendor lists UFS support with in-system programming (ISP) of UFS, at stated transfer speeds of 100 MB/s reading and 55 MB/s writing. [medusabox.com]
  • The Pro II supports 1-bit, 4-bit and 8-bit MMC bus modes over a USB 3.0 high-speed connection, with a built-in Partition Manager and Smart-Repair-Files (SRF) for repairs. [medusabox.com]
  • Medusa PRO Software v.2.2.5.5 (vendor news post, 2024-09-19) added UFS 3.1 and UFS 4.0 low-voltage mode support. [medusabox.com]
  • The vendor's download page lists Medusa Pro Repair Suite installer 2.2.5.8 dated 2025-11-25. [medusabox.com]
  • The separate Medusa II Box Basic Set supports JTAG for ARMv5, ARMv6 and ARMv7 cores (up to 24 MHz in the vendor's comparison table) but has no UFS support. [medusabox.com]

Limitations

  • The vendor's comparison table shows no JTAG support on Medusa Pro II (JTAG is a feature of the Medusa II and original Medusa boxes). [medusabox.com]
  • The vendor describes the product as a tool to 'read/write boot, flash and repair' phones; the pages reviewed make no forensic-use claims. NIST SP 800-101 Rev. 1 (2014) notes of flasher boxes generally that nearly all were not designed for forensic use; it does not name this product. [nvlpubs.nist.gov]

Locked and encrypted devices

The vendor makes no claim about locked or encrypted devices in the pages reviewed. For context, Android documentation states that devices launching with Android 10 or later must use file-based encryption, with FBE keys stored encrypted on disk and non-CE keys wrapped by a Keystore key 'not exposed outside the TEE'; the documentation does not discuss raw eMMC/UFS reads, so any conclusion about what such a read returns is this site's inference.

Sources: medusabox.com, source.android.com

Statements about lock bypass are point-in-time and attributed to their source; support changes with device and OS releases. See the methodology.

Related tools

Guides that discuss this tool

Sources

  1. Medusa Box: home page (Pro II, II and original Medusa) (medusabox.com)
  2. Medusa Box: software downloads (medusabox.com)
  3. Medusa Box: news (medusabox.com)
  4. NIST SP 800-101 Rev. 1: Guidelines on Mobile Device Forensics (2014) (nvlpubs.nist.gov)
  5. Android Open Source Project: file-based encryption (source.android.com)
  6. Medusa Box: news archive, page 2 (medusabox.com)

Reviewed . Spotted an error? See the corrections policy.