SIMtrace 2

Osmocom project and sysmocom · also known as Osmocom SIMtrace2

Open sourceActive

The GitHub repository is a mirror of gitea.osmocom.org/sim-card/simtrace2. The Osmocom wiki page could not be opened (bot-challenge page) so it was not used as a source.

SIMtrace 2 is Osmocom's second-generation SIM card tracing hardware with open firmware and Linux host programs. According to the repository README it can trace communication between a (U)SIM card and a phone, forward a remote (U)SIM, and act as a (U)SIM man-in-the-middle. Captured protocol traces can be decoded with pySim-trace. The README describes no forensic acquisition use.

Facts

Websiteosmocom.org
VendorOsmocom project and sysmocom
LicenceOpen source (Software: GPL-2.0-or-later per the headers of the host and firmware source files sampled (host/COPYING is the GPLv2 text); GitHub reports no repository-level licence and the licence of the open hardware designs was not checked)
CategoryHardware (chip-off, JTAG, ISP)
FunctionsAnalysis
TargetsSIM cards
Runs onHardware, Linux
PricingSoftware free; hardware kits sold separately by sysmocom (price not checked) [github.com]
UsersResearch, Open-source DFIR community
Last activity2026-09-07 · Latest commit on the GitHub mirror; most recent tag 0.9.1 (tag message 'Release v0.9.1 on 2026-07-08') [github.com]
GitHub activityosmocom/simtrace2 · 175 stars · last push 2026-10-31 · checked 2026-11-10

Capabilities

  • The README describes the SIMtrace 2 devices as providing the ability to trace the communication between a (U)SIM card and a phone, remote (U)SIM card forwarding, and (U)SIM man-in-the-middle. [github.com]
  • Host software listed in the README: libosmo-simtrace2 (shared library), simtrace2-list (lists USB-attached devices running the firmware), simtrace2-sniff (interfaces the 'trace' firmware to obtain card protocol traces) and simtrace2-cardem-pcsc (interfaces the 'cardem' firmware to use a SIM in a PC/SC reader). [github.com]
  • The firmware README lists these applications: dfu (USB DFU bootloader), ccid (use as a USB CCID smartcard reader), cardem (remote SIM operation), trace (monitor communication between a SIM card and a phone) and triple_play (the previous three functions via USB configurations). [github.com]
  • Supported hardware per the README: the Osmocom SIMtrace2 and ngff-cardem boards with a SAM3 controller (described as open hardware with published schematics and PCB design), the sysmocom sysmoQMOD, and a sysmocom OWHW board. [github.com]
  • The pySim README states that pySim-trace.py decodes SIM card protocol traces such as those obtained with Osmocom SIMtrace2. [github.com]

Limitations

  • The README states nothing in the repository applies to SIMtrace v1.x hardware or its firmware, which use a different CPU architecture, software stack and host software. [github.com]
  • The README says only a Linux system running on bare hardware is supported, and that running SIMtrace2 in a virtual machine with USB pass-through is unsupported because of critical timing. [github.com]
  • Not all supported hardware is open or obtainable: the README calls the sysmoQMOD proprietary and the OWHW not publicly available, and the firmware README describes the SAM3S microcontroller as no longer recommended for new designs. [github.com]

Related tools

Guides that discuss this tool

Sources

  1. GitHub: osmocom/simtrace2 (README) (github.com)
  2. GitHub: simtrace2 firmware README (github.com)
  3. GitHub: simtrace2 commit history (github.com)
  4. GitHub: osmocom/pysim (README, pySim-trace) (github.com)

Reviewed . Spotted an error? See the corrections policy.