DatCon
FreewareStatus uncertain
Latest listed download is 4.3.0 dated 2023-03-19; no later release or announcement was found on the site. The supported-aircraft list on the intro page names no newer DJI models than the Matrice M600 and Inspire 2 for onboard .DAT files. No source repository or licence text was found, and it was not tested.
DatCon is a free offline Java application that reads the .DAT flight log files written by certain DJI drones and converts them into output files, including .csv and files for Google Earth, that can be opened in spreadsheet or mapping tools or in the same developer's CsvView. The developer lists the supported aircraft and states which .DAT files are encrypted and cannot be processed. The latest downloadable version is 4.3.0, dated 2023-03-19.
Facts
| Website | datfile.net |
|---|---|
| Vendor | datfile.net (individual developer; no name given on the pages reviewed) |
| Licence | Freeware (No licence text found on the site; the home page describes CsvView and DatCon as 'free offline apps'. Source code is not published on the pages reviewed.) |
| Category | Artefact parsers |
| Functions | Parsing, Decoding |
| Targets | Drones |
| Runs on | Windows, macOS (Java .jar), Linux (Java .jar) |
| Pricing | Free [datfile.net] |
| Users | Open-source DFIR community, Research |
| Last activity | 2023-03-19 · DatCon 4.3.0 listed on the downloads page [datfile.net] |
Capabilities
- Reads a .DAT file and creates output files containing data extracted from it, which the site says can be used in Excel and Google Earth. [datfile.net]
- The home page states that DatCon's output files can be used by CsvView, Excel, Dashware and Google Earth. [datfile.net]
- The developer lists these .DAT sources as supported: Phantom 3, Inspire 1, Mavic Pro, Phantom 4, Phantom 4 Pro, Inspire 2, Matrice M100 and M600 onboard .DAT files, and .DAT files created by the DJI Go and Fly apps on the mobile device for all platforms except the Mavic Mini 2. [datfile.net]
- The DatCon3 release notes (for version 3.1.0) state that besides signals obtained by reverse engineering the .DAT, it can use 'DatDefined' signals whose definitions are inside the .DAT itself, with over 750 available depending on platform and firmware, selectable through a ParsingMode menu. [datfile.net]
- The developer describes DatCon as an offline app that is installed on a PC, Mac or Linux system and then run locally. [datfile.net]
- The downloads page gives a Windows installer package (DatConSetup) and, for Mac, running the DatCon .jar from a command line with java -jar. [datfile.net]
Limitations
- The developer states that the onboard .DAT for the Mavic Air, Mavic 2, Mavic Air 2, Mavic Mini and Mavic Mini 2 is encrypted and cannot be processed by DatCon or CsvView, and that the .DAT created for the Mavic Mini 2 by the Fly app is also encrypted. [datfile.net]
- The DatCon3 release notes state the signals known to earlier versions were obtained by reverse engineering the .DAT file, and that DatDefined signal labels can be lengthy or obscure and can change between platforms and firmware versions. [datfile.net]
- The site's procedure for retrieving a .DAT from a Phantom 3 or Inspire 1 has the examiner put the aircraft into flight data mode from the DJI GO app and mount its data drive over USB; the site states that this creates an 'extra' .DAT file, because recording stops when the aircraft is put into MC Data Mode. [datfile.net]
- DatCon requires a 64-bit Java runtime. [datfile.net]
Links
Related tools
- CsvView · Analysis
- DroneXtract · Analysis
- dji-log-parser · Artefact parsers
Guides that discuss this tool
- Drone forensics: flight logs and media · Where evidence sits on a small drone, how DJI and open-autopilot logs differ, what EXIF GPS shows, and what logged times and positions can and cannot prove.
Sources
- datfile.net: CsvView/DatCon home page (datfile.net)
- DatCon: Introduction (datfile.net)
- DatCon: Downloads (datfile.net)
- DatCon3 release notes (datfile.net)
- DatCon: Retrieving a .DAT from the P3 or Inspire (datfile.net)
Reviewed . Spotted an error? See the corrections policy.